Capacity Rating: 229 watts at a 0 °C temperature difference (32 °C ambient).
Example Applications: Ideal for electronics enclosures, telecommunications equipment and battery boxes.
Features: High cooling capacity in an overall compact size. Narrow 150 mm (5.9″) width. This cooler is powered by 24 VDC and is rated to maintain the enclosure’s NEMA 4 rating. The external-side fan is rated IP-68, it has an anodized heat sink and stainless steel hardware. The AC-220 can be used for heating as well as cooling, and thermostats are included for over-temperature protection. The external fan can be speed controlled for improved efficiency and lower noise. Labeled wiring cables are included free of charge when purchasing interconnected standard products on the same order (thermoelectric cooling assembly or module, temperature controller and/or a power supply). The number of cables included (1-3 pairs) will depend on the number of components being interconnected.
Search Products
AC-220
Capacity Rating: 229 watts at a 0 °C temperature difference (32 °C ambient).
Example Applications: LED/LCD signs and displays, telecommunications equipment, electronics enclosures, and battery boxes.
Features: High cooling capacity with a narrow 150 mm (5.9″) overall width, making it easy to get significant cooling capacity in a small space. The cooler is powered by 24 VDC and is rated to maintain the enclosure’s NEMA 4 rating. The AC-220 is protected against harsh environments with an IP-68 rated external fan, marine-grade anodizing on the external heat sink, and stainless steel hardware. The external fan is speed controllable and has a tachometer output. AC-220 can also be used for heating and over-temperature thermostats are included.
In Stock
• High Capacity: Removes 215 W of heat in a 35 °C ambient at a 0 °C temperature difference.
• Narrow 150 mm (5.9″) overall width.
• Protected against harsh environments — meets NEMA 4 and IP68 (external fan) specifications.
• Powered by 24 VDC.
• All wiring is accessible from inside the enclosure.
• Internal fan blows air into the center of the enclosure so cooled air can be aimed at components that need the most cooling.
• Cools up to 44 °C below ambient in a 25 °C environment.
• Can be used for heating and cooling (requires heat/cool controller).
• Over-temperature thermostats included on both fin sets (signal level only).
• Operating temperature range is -20°C to +70 °C.
• External fan can be speed controlled with the TC-720 temperature controller for improved efficiency and/or reduced noise.
• External fan has a tachometer output signal.
• CE marked and RoHS compliant.
The AC-220 provides high cooling capacity in a narrow 150 mm wide (5.9″) package. The overall dimensions are compact making it easy to get significant cooling capacity in a small space. The cooler is powered by 24 VDC and is rated to maintain the enclosure’s NEMA 4 rating. The AC-220 is protected against harsh environments via an anodized external heat sink, stainless steel hardware, and an IP-68 rated external fan. The external fan is also speed controllable and has a tachometer output signal. Like all cooling assemblies from TE Technology (and unlike many coolers from competitive companies) the thermoelectric/Peltier elements have our epoxy potting and the assembly is sealed to reduce moisture ingress inside the cooler.
The AC-220 can also be used for heating, and two over-temperature thermostats are incorporated in the cooler (one on each set of fins). The thermostats are intended to provide a separate means of over-temperature protection for the cooler and equipment and can be monitored via the interlock feature on a TC-720 temperature controller or used to control the output inhibit line on a PS-24-25 power supply. Please note these thermostats are NOT intended as a means of temperature control for the cooler or for direct switching of high-current loads.
Finally, as with all TE Technology coolers it can also be customized with other features if production quantities are needed.
AC-220 3D Model in .pdf Format (Requires Adobe Reader 8.0 or higher)
3D PDF MODEL: Click on the link above to download a 3D solid model in portable document format (PDF). This must be opened in the Adobe Reader (or Acrobat) version 8 or higher. It WILL NOT WORK IF OPENED IN A BROWSER WINDOW. You can rotate and view the cooler from any angle (however, wire leads are not shown in the model). 3D content may initially appear as a two-dimensional preview image. Clicking the 3D model with the Hand or Select tool enables (or activates) the model and opens the 3D toolbar.
| 3D Solid Models |
| Parasolid: AC-220.x_t (best for importing into SolidWorks) See note below before downloading files. |
| STEP: AC-220.stp See note below before downloading files. |
NOTE WHEN DOWNLOADING FILES: When saving a solid model some browsers change the name of the file extension. If this happens save the file to your computer using the “Save link as…” option and then rename the file extension back to the appropriate type before using. (PC Users: Right click on the file link and select “Save link as…” from the menu. Mac Users: Hold the ‘Ctrl’ button on your keyboard while clicking on the file link and select “Save link as…” from the menu.) Alternatively, you can download as normal and rename the .htm or .html extension back to .x_t or .stp before using.
Compatible With:
-
TC-720
$784.00 Add to cart Product DetailsThe TC-720 is a bipolar, heat and cool, thermoelectric temperature controller with USB communications. It is capable of controlling up to 36 volts and 20 amps. One standard thermistor, model MP-3193, is included. A second sensor can be attached for monitoring and alarm purposes. The controller is housed in a die-cast aluminum box and incorporates a keypad and a liquid-crystal display. The display allows the user to monitor the sensor temperature, power output level, and menu settings. The integrated keypad accesses an easy-to-use menu system, allowing the user to adjust all of the basic controller parameters such as the set temperature, tuning parameters, and alarm parameters. The controller can also be connected to a computer via USB for more advanced program control as well as data graphing and data logging using the supplied software. The software is shipped as a stand-alone program, but the LabVIEW source code for that program (version 2018 and higher) is available upon request and a sample read and write command programmed in Python is also available for download.
-
TC-720 OEM
$617.00 Add to cart Product DetailsThe TC-720 OEM is a basic version of the TC-720 controller that is a component for Original Equipment Manufacturers (OEM’s) that want to integrate the controller in a system where the display, keypad, and box are not needed. The TC-720 is a Heat & Cool (Bipolar) control controller, and all programming and monitoring functions are accomplished via the on-board USB communications port. The controller is shipped as the basic control circuit mounted on an aluminum panel. One standard thermistor (model MP-3193) and a software CD are included. The software is shipped as a stand-alone program, but the LabVIEW source code (version 2018 and higher) is available upon request and a sample read and write command programmed in Python is also available for download.
-
TC-48-20 OEM
$311.00 Add to cart Product DetailsThe TC-48-20 OEM has the same control capabilities as the TC-48-20 but leaves off the keypad, display interface, and housing to keep costs to a minimum. The controller can be connected to a computer via an optional RS232 serial cable and used with the included software to provide program control as well as data graphing and data logging. The software is shipped as a stand-alone program, but the LabVIEW source code (version 2011 and higher) is also available upon request and a sample read and write command programmed in Python is also available for download.
-
TC-36-25-RS232
$644.00 Add to cart Product DetailsThe TC-36-25 RS232 is a bi-polar (heat and cool) proportional-integral-derivative temperature controller that can modulate power input from 12 V up to 36 V, or from 0 V to 36 V with a second power supply, at currents of up to 25 A. The controller comes standard with a temperature sensor (thermistor), but it can also be used with common 10 k ohm thermistors. In addition, Windows-compatible software and an RS232 cable are provided for direct communication via the serial communication port. LabVIEW-based GUI available as a download, the LabVIEW source code is available free of charge upon request, and a sample read and write command programmed in Python is also available for download.
-
PS-24-25
$215.00 Add to cart Product DetailsA 24 volt DC, fixed-voltage power supply capable of delivering up to 25 amps of current. The power supply features a wide input voltage range; no manual selection necessary. One North-American standard power cord is attached and power cords for the UK, EU, and Italy can be purchased separately.
-
TC-48-20
$506.00 Add to cart Product DetailsThe TC-48-20 is an easy to use yet powerful cool-only or heat-only PWM temperature controller. It is housed in a die-cast aluminum box, incorporates a keypad and display, and is capable of controlling from 0 to 50 volts and up to 20 amps. Two versatile alarm outputs are included, each capable of switching up to 1 amp of current. If a true linear-output control system is desired (for applications extremely sensitive to electrical noise) the TC-48-20 can be used as the control head for high-power, variable-output linear supplies. Most control parameters can be programmed via the built-in keypad, but the controller can also be connected to a computer via an optional RS232 serial cable for more advanced program control as well as data graphing and data logging. The software is shipped as a stand-alone program, but the LabVIEW source code (version 2011 and higher) is also available upon request and a sample read and write command programmed in Python is also available for download.
-
TC-36-25-RS232-UL
$689.00 Add to cart Product DetailsThe TC-36-25-RS232-UL has the same features as the TC-36-25 RS232, including bi-polar (heat and cool) proportional-integral-derivative control that can modulate input voltages of up to 36 V at currents of up to 25 A. This version is CE marked and is MET-Labs listed, conforming to UL 60730-1. Due to listing requirements the controller does not come with a temperature sensor (thermistor) or RS232 cable, but these can be ordered separately. Windows-compatible, LabVIEW-based GUI software is available as a download, the LabVIEW source code is available free of charge upon request, and a sample read and write command programmed in Python is also available for download.
-
TC-36-25-RS485
$708.00 Add to cart Product DetailsThe TC-36-25 RS485 is a bi-polar (heat and cool) proportional-integral-derivative temperature controller that can modulate power input from 12 V up to 36 V, or from 0 V to 36 V with a second power supply, at currents of up to 25 A. The controller comes standard with a temperature sensor (thermistor), but it can also be used with common 10 k ohm thermistors. Multiple controllers can be daisy-chained together and run off a single communication port using the optional RS485 Adapter (USB). Windows-compatible software is provided for easily programming the controller. The LabVIEW-based software is shipped as a stand-alone program, the LabVIEW source code (version 2011 and higher) is available free of charge upon request, and a sample read and write command programmed in Python is also available for download.
