PS-24-25

In Stock

A 24 volt DC, fixed-voltage power supply capable of delivering up to 25 amps of current. The power supply features a wide input voltage range; no manual selection necessary. One North-American standard power cord is attached and power cords for the UK, EU, and Italy can be purchased separately. Labeled wiring cables are included free of charge when purchasing interconnected standard products on the same order (thermoelectric cooling assembly or module, temperature controller and/or a power supply). The number of cables included (1-3 pairs) will depend on the number of components being interconnected.

This power supply features an output enable connections on the terminal strip (R.C.G. & R.C.). The output is “on” when the included jumper/short is in place. If the jumper/short is removed the output is “off”. This is a low-voltage, low-current signal that can be used to disable the power supply if the jumper is replaced with a switch or thermostat. The thermostat should be used only as an over-temperature / under-temperature safety switch and not as a regular means of temperature control.

Features:

RoHS compliant.

Input Voltage: 88-264 VAC , 47-63 Hz

Input Voltage Range Selection: No selection required, continuous within range.

Power Factor Correction: Yes

Output Voltage: 24 V DC

Output Voltage Adjustment: +/- 10% via adjustable potentiometer

Maximum Output Current: 25 A

Over-Current Protection: Yes, 105~135% rated output power, automatic recovery.

Dimensions: 185 x 120 x 93 mm

Cooling: Fan cooled, fan speed regulated via internal temperature sensor.

Maximum ambient: 60 degrees Celsius. For ambient temperatures above 45 degrees Celsius, derate output current by 2.7% per degree Celsius. For operation below 115 VAC, derate by 0.74% per volt.

PS-24-25 Data Sheet

3D PDF Model: PS-24-25-3d.pdf

3D PDF MODEL: Click on the link above to download a 3D model. You can rotate and view the cooler from any angle to better understand the physical properties of the product. This is a portable document format (.pdf) file, Adobe Reader 8 or higher is all that is required for viewing. 3D content may initially appear as a two-dimensional preview image. Clicking the 3D model with the Hand or Select tool enables (or activates) the model and opens the 3D toolbar.

3D Solid Models

Parasolid: PS-24-25.x_t (best for importing into SolidWorks)
See note below before downloading files.

STEP: PS-24-25.stp
See note below before downloading files.

NOTE WHEN DOWNLOADING FILES: When saving a solid model some browsers change the name of the file extension. If this happens save the file to your computer using the “Save link as…” option and then rename the file extension back to the appropriate type before using. (PC Users: Right click on the file link and select “Save link as…” from the menu. Mac Users: Hold the ‘Ctrl’ button on your keyboard while clicking on the file link and select “Save link as…” from the menu.) Alternatively, you can download as normal and rename the .htm or .html extension back to .sldprt or .stp before using.

AC-162

Capacity Rating: 159 watts at a 0°C temperature difference.
Example Applications: Electronic enclosures, refrigerators and biomedical equipment where cooling to near-freezing temperatures is desired.
Features: Six thermoelectric modules, extender blocks, and a bonded-fin heat sink and cold sink make this cooler very efficient and compact for its capacity. The bonded-fin cold sink keeps the temperature difference between the enclosure’s air and the cold sink to a minimum. This is especially useful for cooling to temperatures near 0 °C when a less efficient cold sink would allow condensation to freeze on it and restrict airflow. This cooler is powered by 24 VDC, is rated to NEMA 12, and can be customized to achieve NEMA 4. Can be used for heating and cooling. It is compatible with theTC-720 series, TC-36-25 series, and TC-48-20 series temperature controllers.

$1,020.00

CP-200HT

Capacity Rating: 196 watts at a 0°C temperature difference.
Example Applications: Laboratory instruments, component test benches, high-power laser diodes, and cooling corrosive liquids with optional stainless-steel liquid exchangers.
Features: A variant of the CP-200, this cooler adds the extra capability of heating up to 100 °C.

$853.00

CP-200HT-TT

Capacity Rating: 196 watts at a 0°C temperature difference.
Example Applications: Laboratory instruments, component test benches, high-power laser diodes, and cooling corrosive liquids with optional stainless-steel liquid exchangers.
Features: A table-top version of the CP-200HT, the unit additionally has a shroud that encloses the fan and also has legs which stand off the fan from the table top, allowing air to enter freely into the heat sink.

$984.00

LC-200

Capacity Rating: 184 watts at a 0°C temperature difference.
Example Applications: Laboratory instruments, laser diode cooling, medical products, recirculating chillers, temperature baths.
Features: High-density bonded-fin heat sink, an eight-pass liquid loop, and six thermoelectric modules for high capacity in a compact size. As with all of our liquid coolers it can be customized with swirl inserts in the liquid loop to improve efficiency at low flow rates. Can be used for heating and cooling. This cooler is powered by 24 VDC and is compatible with the TC-720 series, TC-36-25 series, and TC-48-20 series temperature controllers.

$945.00

Dynamic Pricing
Quantity		Price
1 - 9		$215
10 - 49		$207
50 - 99		$199

Search Products

PS-24-25

Compatible With:

AC-162

PS-AC CORD-ITALY (MP-2833)

CP-200HT

CP-200HT-TT

PS-AC CORD-EU (MP-2831)

PS-AC CORD-UK (MP-2832)

LC-200