Typically attached to our standard cold plate coolers to make a liquid cooler with a 316 stainless steel (SS) liquid path. The LC-SSX1 is a heat sink / passive exchanger only; and the capacity of system will vary depending on the cold plate cooler to which it is attached. Used alone it has a 0.033 K/W thermal resistance at a 25 °C, 1.6 L/minute water flow rate. Useful for laboratory instruments, laser diode cooling, medical products, recirculating chillers, or temperature baths utilizing high purity or corrosive liquids.
Search Products
LC-SSX1
Typically attached to our standard cold plate coolers to make a liquid cooler with a 316 stainless steel (SS) liquid path. The LC-SSX1 is a heat sink / passive exchanger only; and the capacity of system will vary depending on the cold plate cooler to which it is attached. Used alone it has a 0.033 K/W thermal resistance at a 25 °C, 1.6 L/minute water flow rate. Useful for laboratory instruments, laser diode cooling, medical products, recirculating chillers, or temperature baths utilizing high purity or corrosive liquids.
In Stock
The combination of a cold plate and one or two of the LC-SSX1 exchangers makes a liquid cooler that is capable of being used with high purity or corrosive fluids. These systems can also be used for condensing vapors from gas streams where the condensate is corrosive. The LC-SSX1 is a single piece of stainless steel tubing looped and then embedded in an aluminum base plate. This heat exchanger is designed to be attached to the CP-061, CP-065, CP-110, CP-121, CP-130HT, and CP-200 series cold plate coolers.
• 316L stainless steel tubing is ideal for many types of liquids which are otherwise not compatible with anodized aluminum or copper.
• Tube ends are straight 3/8 inch (9.5 mm) outer diameter for use with common compression fittings.
• Heat exchanger provides a four-pass liquid loop.
• Base plate has through-holes that align with mating threaded holes in many of our standard cold plates, allowing for easy attachment.
• Ideal for laser diode coolers, temperature baths, small vapor condensers, recirculating water chillers or in-process fluid cooling.
Two LC-SSX1 liquid exchangers shown mounted to a CP-200 cold plate cooler. The cold plate coolers are sold separately and the LC-SSX1 exchangers are sold individually. The LC-SSX1 exchanger can be mounted to other cold plate coolers–see specification sheet for details.
LC-SSX1 3D Model in .pdf Format (Requires Adobe Reader 8.0 or higher)
3D PDF MODEL: Click on the link above to download a 3D model. You can rotate and view the cooler from any angle to better understand the physical properties of the product. (However, wire leads are not shown in the model.) This is a portable document format (.pdf) file, Adobe Reader 8 or higher is all that is required for viewing. 3D content may initially appear as a two-dimensional preview image. Clicking the 3D model with the Hand or Select tool enables (or activates) the model and opens the 3D toolbar.
| 3D Solid Models |
| Parasolid: LC-SSX1.x_t (best for importing into SolidWorks) See note below before downloading files. |
| STEP: LC-SSX1.stp See note below before downloading files. |
NOTE WHEN DOWNLOADING FILES: When saving a solid model some browsers change the name of the file extension. If this happens save the file to your computer using the “Save link as…” option and then rename the file extension back to the appropriate type before using. (PC Users: Right click on the file link and select “Save link as…” from the menu. Mac Users: Hold the ‘Ctrl’ button on your keyboard while clicking on the file link and select “Save link as…” from the menu.) Alternatively, you can download as normal and rename the .htm or .html extension back to .x_t, .sldprt or .stp before using.
Compatible With:
-
CP-200HT
$853.00 Add to cart Product DetailsCapacity Rating: 196 watts at a 0°C temperature difference.
Example Applications: Laboratory instruments, component test benches, high-power laser diodes, and cooling corrosive liquids with optional stainless-steel liquid exchangers.
Features: A variant of the CP-200, this cooler adds the extra capability of heating up to 100 °C. -
CP-130HT
$399.50 Add to cart Product DetailsCapacity Rating: 130 watts at a 0 °C temperature difference.
Example Applications: Medical and laboratory instruments, thermal stabilization of electronic components, and laser diodes.
Features: Four-module cold plate increases the heat-pumping capacity for cooling medium to large heat loads. Exceptional heat-pumping capacity in a small size. Can be used for cooling and heating up to 100 °C (bi-polar controller required). This cooler is powered by 24 VDC and is compatible with the TC-720 series, TC-36-25 series, and TC-48-20 series temperature controllers. -
CP-110
$466.50 Add to cart Product DetailsCapacity Rating: 110 watts at a 0°C temperature difference.
Example Applications: Laboratory instruments, laser diodes, medical products, and cooling corrosive liquids with an optional stainless-steel liquid exchanger.
Features: This cold plate uses two large thermoelectric modules for cooling medium sized heat loads. The high efficiency bonded-fin heat sink keeps the cooler small yet effective. One stainless-steel liquid exchanger can also be attached for cooling of corrosive liquids (please inquire for this option). Can be used for heating and cooling. This cooler is powered by 24 VDC and is compatible with the TC-36-25, TC-48-20 and TC-720 series temperature controllers. -
CP-065
$295.50 Add to cart Product DetailsCapacity Rating: 65 watts at a 0°C temperature difference.
Example Applications: Medical and laboratory instruments, thermal stabilization of electronic components, and laser diodes.
Features: Another two-module cooling system with the heat sink airflow directed in a more typical configuration (in the middle and out both ends). Like all of our coolers, it can be easily customized to meet your production requirements: special cold plates, smaller heat sinks, different operating voltages, lower power consumption, et cetera. Can be used for heating and cooling. This cooler is powered by 24 VDC and is compatible with all of our temperature controllers. -
TP-1
$21.00 Add to cart Product DetailsGeneral purpose zinc oxide thermal paste improves the heat transfer between adjoining surfaces. Used when mounting thermoelectric (Peltier) modules, temperature sensors, and when attaching objects to cold plates. Non-silicone, exhibits zero bleed. Product weight: 28.4 grams (1 oz.); enough to cover approximately seventy 40 x 40 mm modules on both sides.
-
MP-3874 Mixer Coils
$19.00 Add to cart Product DetailsTypically installed in the LC-066SS liquid cooler or LC-SSX1 heat exchanger (which can then be attached to our standard cold plate coolers to make a liquid cooler with a 316 stainless steel (SS) liquid path). The MP-3874 mixer coils provide an inexpensive way to increase heat transfer and overall heat pumping capacity, particularly in low flowrate applications and/or with high-viscosity fluids.
-
CP-200HT-TT
$984.00 Add to cart Product DetailsCapacity Rating: 196 watts at a 0°C temperature difference.
Example Applications: Laboratory instruments, component test benches, high-power laser diodes, and cooling corrosive liquids with optional stainless-steel liquid exchangers.
Features: A table-top version of the CP-200HT, the unit additionally has a shroud that encloses the fan and also has legs which stand off the fan from the table top, allowing air to enter freely into the heat sink.
