PS-12-8.4A

A 12 volt DC, fixed-voltage power supply capable of delivering up to 8.4 amps of current. The power supply features a wide input voltage range; no manual selection necessary. One North-American standard power cord is attached and power cords for the UK, EU, and Italy can be purchased separately. When ordered in conjunction TE Technology coolers and temperature controllers the interconnection cables are included free of charge.

SKU: 6010. Category: .

In Stock

Dynamic Pricing
Quantity   Price
1 - 9 $62.50
10 - 49 $59.50
50 - 99 $57
100 - 249 $54

A 12 volt DC, fixed-voltage power supply capable of delivering up to 8.4 amps of current. The power supply features a wide input voltage range; no manual selection necessary. One North-American standard power cord is supplied attached to the power supply and power cords for the UK, EU, and Italy can be purchased separately. When ordered in conjunction TE Technology coolers and temperature controllers the interconnection cables are included free of charge

A 12 volt DC, fixed-voltage power supply capable of delivering up to 8.4 amps of current. The power supply features a wide input voltage range; no manual selection necessary. One North-American standard power cord is attached and power cords for the UK, EU, and Italy can be purchased separately. When ordered in conjunction TE Technology coolers and temperature controllers the interconnection cables are included free of charge.

Features:

RoHS compliant.

Input Voltage:  88 – 264 VAC

Minimum / Maximum Input Voltage:  88 V AC 264 V AC

Input Voltage Range Selection:  None, continuous between minimum and maximum.

Power Factor Correction:  No

Output Voltage:  12 V DC

Output Voltage Adjustment:  11.4 to 13.2 V via adjustable trimpot / potentiometer

Maximum Output Current:  8.4 A

Over-current Protection:  Yes, 110~150% rated output power, automatic recovery.

Dimensions:  159 x 97 x 38 mm

Cooling:  Natural Convection

Maximum Ambient:  70 degrees Celsius. For operation in ambient temperatures above 50 degrees Celsius or with input voltages below 115 VAC refer to derating curves in specification sheet.

pdf-iconPS-12-8.4A Data Sheet

(Data sheet is for base power supply only; power cord not shown.)

step-iconSolid Model: PS-12-8.4A.stp
(Solid Model is for base power supply only; power cord not shown.)

Compatible with:

  • AC-027

    $226.00

    Capacity Rating: 24 watts at a 0°C temperature difference.
    Example Applications: Ideal for small electronic enclosures, small refrigerators and OEM applications.
    Features: This is our smallest air cooler. It is powered by 12 VDC, has a NEMA 12 rating, and can be customized to achieve NEMA 4. Like all of our air coolers, it incorporates extender blocks between the thermoelectric module and the cold sink. These enable the cooler to have un-impeded airflow on the cold side while still allowing for up to 25 mm thick insulation in the walls of the enclosure. Plus, it also improves performance at high temperature differences. Can be used for heating and cooling. This cooler has the lowest power consumption of any of our standard air coolers making it compatible with all of our temperature controllers.

    Product DetailsQuick View
  • Three-quarter view of thermoelectric cold plate cooler/heater. Cooled aluminum plate on the front, waste heat exhausted to fins on back. Fins are fan cooled. The fan air enters on the middle back and exhausts on sides. Operates on 12 volts DC and removes 30 watts of heat at a 0°C temperature difference relative to ambient.

    CP-031

    $154.00

    Capacity Rating: 28 watts at a 0°C temperature difference.
    Example Applications: Small laser diodes and laboratory instruments.
    Features: This cold plate provides effective direct contact cooling in our lowest cost standard assembly. The lack of an extender block between the module and cold plate helps make this our smallest cold plate. The cooler is best suited for small heat loads where a large temperature difference is not needed. Can be used for heating and cooling. Powered by 12 VDC, it has the lowest power consumption of any of our standard cold plates, which makes it compatible with all of our temperature controllers.

    Product DetailsQuick View
  • Three-quarter view of thermoelectric cold plate cooler/heater. Cooled aluminum plate on the front, waste heat is exhausted to fins on back. Fins are fan cooled. The fan air enters on the middle back and exhausts on sides. Operates on 12 volts DC and removes 32 watts of heat at a 0°C temperature difference relative to ambient. An internal extender block improves the heat pumping capacity at larger temperature differences.

    CP-036

    $195.00

    Capacity Rating: 32 watts at a 0°C temperature difference.
    Example Applications: Medical and laboratory instruments.
    Features: Provides good cooling for small heat loads at low temperatures. This is made possible by using a large heat sink for only one thermoelectric module and an extender block that allows extra insulation between the heat sink and cold plate. Can be used for heating and cooling. Powered by 12 VDC, its low power consumption makes it compatible with all of our temperature controllers.

    Product DetailsQuick View
  • PS-AC CORD-EU

    $17.00

    Replacement power cord for power supply, EU plug. Details and Wiring Instructions

    Product DetailsQuick View
  • PS-AC CORD-UK

    $17.00

    Replacement power cord for power supply, UK plug. Details and Wiring Instructions

    Product DetailsQuick View
  • PS-AC CORD-ITALY

    $17.00

    Replacement power cord for power supply, EU plug.

    Product DetailsQuick View
X